Product Name: Rescue Seat

The Rescue Seat is a compact, lightweight, and simple to use rescue device. Equipped with two folding seats and a flotation collar, it may be utilized for both maritime and land rescue operations. Patterned after the military Forest Penetrator, the Rescue Seat has been designed for simple operation and ease of maintenance. All problems associated with the military Forest Penetrator have been eliminated.

Constructed of 304 stainless steel with 316 stainless hardware, the LSC Rescue Seat is virtually maintenance free. Each fold-down seat is equipped with a safety strap, and printed instructions are located on two opposite sides of the float collar.

《Buy & Request Product》

Product Name: Rescue Equipment Cases

Both the #260 & 261 are heavy-duty and lightweight hang-up cases providing storage for miscellaneous rescue equipment. The cases can quickly be moved from one vessel/aircraft to another. Constructed of 1050 denier ballistics nylon with urethane coating on the backside. Each has three top attachment points that can either be attached to rings or around tubes. The bottom of the cases are secured by two adjustable straps with snap hooks. All pocket flaps are secured with hook & loop closures.

Hardware is corrosion resistant.

《Buy & Request Product》

Product Name: Chemical Light Strap

Strap is used for attaching Lightsticks to rescue hooks or other devices during night operations. Hardware is made of brass and stainless steel for corrosion resistance.
 

《Buy & Request Product》

Product Name: Trail Line Assembly

Used to control & guide rescue equipment to the desired location during helicopter hoisting operations. Assembly contains line pack, 120' of 3/8" polypropylene diamond braided rope (#498), one weak-link (400-500 lbs.), one 5 lb. shot bag, one pair of line handling gloves, and a V-Strap for hoisting the Medevac & Stokes-type litters.

Hardware is stainless steel for corrosion resistance.
 

《Buy & Request Product》

Product Name: Rescue Strop

The Rescue Strop is used to hoist uninjured Military personnel during helicopter operations. The Strop is placed under the arms and across the back; the safety strap located on the outside is pulled loose, placed over the arms, under the front of the Strop and attached across the front of the chest and adjusted to a snug fit. The arms must remain down to prevent possible slippage during hoisting. Pictorials are printed on the Strop. Personnel must be trained in the proper and safe use of this item. The Rescue Strop is designed to be unaffected by repeated use in the marine environment; constructed of nylon, closed-cell foam and stainless steel hardware.
 

《Buy & Request Product》

Product Name: Quick Strop

Originally designed for the US Coast Guard, the LSC Quick Strop is now available to all rescue activities. Constructed of MIL-SPEC webbing and stainless steel hardware, the Quick Strop provides a quick, safe means of hoisting uninjured personnel. The Strop can be placed under the arms, around the back, or over the head of the survivor in one quick motion. To prevent the survivor from slipping out, a slide buckle is slid down the Strop and attached to an adjustable crotch safety strap which is stored in a zipper pocket on the rear of the Strop.

Instructions and pictorials are printed on the Strop.
 

《Buy & Request Product》

Product Name: Cable Ladders

LSC’s professional cable ladder is the finest available. The newly improved ladder is constructed of ¼" (7x19) stainless steel cable with ¾" x 18-guage titanium tubing for rungs. Each rung is fully diamond knurled for increased grip. Rungs are swaged onto the ladder cables with titanium compression plugs. This unique design provides for a very low profile swage. Rung slippage on the cable occurs at over 1,500 lbs. Stainless steel thimbles are located at the end of each cable to allow attachment to the aircraft or the addition of another cable ladder.

《Buy & Request Product》

Product Name: D-LOK Helicopter Hoist

                              Hooks

The D-LOK Hoist Hook incorporates an automatic dual-lock latch gate design. This double lock gate provides the ultimate in security to prevent accidental openings, while allowing the latch gate to be operated quickly and easily with one hand. The Hoist Hook features a large hook eye for multiple equipment rings, and will accept rings over one inch in diameter. Integral utility eye (model #410 only) allows attachment of tag/guide line. Hook is constructed entirely of stainless steel for strength and corrosion resistance.

The D-LOK Hoist Hook eliminates all problems associated with the current double rescue hook, such as inadvertent engagement (including the snagging of fingers on the small hook), and self-release (ring roll-out).

《Buy & Request Product》

Product Name: Rescue Basket

The compact Rescue Basket has been selected as standard equipment aboard all US Coast Guard rescue helicopters. It is also in service with the US Air Force, US Navy and foreign governments. The Rescue Basket is constructed almost entirely of welded type 304 stainless steel, making it virtually maintenance free. The bail assembly folds into the basket for compact stowage. The structural integrity of the bail is provided by ¼" stainless steel cable acting as the hinge point. The cable routing through the tubing makes for a virtually fail-proof design. The bottom is enclosed with a plastic, semi-rigid net liner with 1" openings. The Rescue Basket possesses excellent flotation characteristics and is positively self-righting with 100% reserve buoyancy. The float covers are constructed of 1050 denier nylon ballistic cloth with a marine urethane coating. Each cover is printed with safety pictorials and has high intensity retroreflective markings.

《Buy & Request Product》