Product Name: SMC Standard Aluminum

                              Locking D Carabiner, Non-

                              Classified

Non-Classified Models

The SMC Standard Aluminum Locking D Carabiner's high-strength, light weight, and wide gate opening have made them the choice of rescuers from the high mountains to urban and industrial locations. They feature a high strength aluminum alloy frame and gate, plus stainless-steel internal parts. The nut locks on the gate, not the frame, to prevent jamming or vibrating loose.
 

《Buy & Request Product》

Product Name: Maillon Rapide Quick

                              Links                 

Quick Links are gaining popularity for use in situations for which carabiners are not recommended, such as when tri-axial loading cannot be avoided. The Delta shape can be used to rig anchors. The Delta and the Half Moon can be used as a chest harness connector. While slower to open and close than a carabiner, they can be more secure when tightened down, and cost less.

《Buy & Request Product》

Product Name:CMC ProSeries Aluminum

                             Locking D Carabiners Large,

                             Auto-Lock

Manufactured by TMI

UL Classified to NFPA 1983 - General Use

Matching high performance with minimum weight, CMC ProSeries carabiners are aluminum carabiners that meet the NFPA strength requirements for General Use. Designed and built to meet the requirements of a rescuer working in the most demanding circumstances, ProSeries carabiners significantly reduce the weight of a rescuer's gear while maintaining the highest possible margin of safety. Available in standard size for minimum weight and length and large size when a wider gate opening or more capacity is needed. Gate choices include the traditional screw gate and a one-hand operable, three-stage auto-locking gate. A joint design project betweek Rock Exotica and CMC Rescue, the CMC ProSeries carabiners are the ultimate choice in a high strength aluminum carabiner.

Gate openings: Std: .7 inch, Large: 1 inch
Weight: Standard: 3.7 oz., Large: 4.4 oz.
 

《Buy & Request Product》

Product Name: CMC ProSeries Aluminum

                              Locking D Carabiners Large,

                              Screw-Lock

Manufactured by TMI

UL Classified to NFPA 1983 - General Use

Matching high performance with minimum weight, CMC ProSeries carabiners are aluminum carabiners that meet the NFPA strength requirements for General Use. Designed and built to meet the requirements of a rescuer working in the most demanding circumstances, ProSeries carabiners significantly reduce the weight of a rescuer's gear while maintaining the highest possible margin of safety. Available in standard size for minimum weight and length and large size when a wider gate opening or more capacity is needed. Gate choices include the traditional screw gate and a one-hand operable, three-stage auto-locking gate. A joint design project betweek Rock Exotica and CMC Rescue, the CMC ProSeries carabiners are the ultimate choice in a high strength aluminum carabiner.

Gate openings: Std: .7 inch, Large: 1 inch
Weight: Standard: 3.7 oz., Large: 4.4 oz.

《Buy & Request Product》

Product Name: Omega Pacific HMS Jake

                              Carabiners

EN 12275

These large, pear-shaped aluminum carabiner are designed to make belaying single person loads with a Munter Hitch easier and more efficient. Available in Screw-Lok, 2-Stage Quik-Lok, and 3-Stage Quik-Lok models.

Gate Opening: 1 inch (25mm)
Color: Pewter with Green gate.
Weight: 3.4 oz (99g)
Strength: 5,000 lbs (23kN)

Every Carabiner is Proof Tested.

《Buy & Request Product》

Product Name: CMC Rescue Standard

                              Aluminum Locking D

                              Carabiners

UL Classified to NFPA 1983 - Light Use

An inexpensive, standard size aluminum carabiner for the user needing a compact carabiner for personal use. Gate opening of .6 inch (15 m). Nut locks on gate to prevent jamming. Manufactured by Omega Pacific.

Every carabiner is Proof Tested.

《Buy & Request Product》

Product Name: CMC Rescue Oval

                              Carabiners

Aluminum non-locking carabiners provide a variety of utility functions such as racking equipment or and the "keeper" carabiner on a load-release hitch. The oval design places equal amounts of force on the spine and gate allowing the carabiner to maintain full strength. Ovals are also used in critical climbing or rescue applicaitons where a stuck gate must be avoided, and then are always used as pairs, rigged opposite and opposed.

3 sigma MBS: 4,720 lbs (21kN)
Weight: 2.2 oz

《Buy & Request Product》

Product Name: CMC Rescue Quik-Lok

                              Carabiners

UL Classified to NFPA 1983 - Light Use

The aluminum anodized carabiners featured in the CMC Escape Kits are available separately. Both have 2-stage locking gates and certification as Light Duty carabiners. The Captive Eye on the red carabiner will keep a web strap or rope loop in place at the same end of the carabiner.

Gate opening: .78 inch
3 sigma MBS: 6,744 lbs (30kN).
Weight: 3.8 oz
 

《Buy & Request Product》

Product Name: SMC Standard Aluminum

                              Locking D Carabiner, UL

                              Classified

UL Classified to NFPA 1983 - Light Use

The SMC Standard Aluminum Locking D Carabiner's high-strength, light weight, and wide gate opening have made them the choice of rescuers from the high mountains to urban and industrial locations. They feature a high strength aluminum alloy frame and gate, plus stainless-steel internal parts. The nut locks on the gate, not the frame, to prevent jamming or vibrating loose.

《Buy & Request Product》

Product Name: CMC Rescue Aluminum

                              Locking D Carabiners

UL Classified to NFPA 1983 - Light Use

A high-strength, aluminum carabiner designed for rescue applications where high performance must combine with minimum weight. CMC engineers worked with carabiner manufacturer Omega Pacific to design the ultimate aluminum rescue carabiner. The nut locks on the gate rather than the frame to minimize jamming or the nut vibrating loose. Gate opening: 1 inch.
 

《Buy & Request Product》